Sweater Poncho
Items:
150 peg 1/2 gauge S loom
60 peg 1/2 gauge loom
3 skeins of Lions Brand Scarfie Yarn
Looming Hook
Crafters Needle
Terms:
CO: Cast On: E-Wrap the amount of pegs it calls for.
EW: E-Wrap: The process of taking the working yarn and
wrapping from back to front and back again.
P: Purl: The process of taking the working yarn pulling it
up through the bottom of the stitch and taking the original stitch off and
placing the new stitch on the peg.
D: Decrease: The process of taking the end stitch and
placing it onto the next peg with a stitch on it.
ID: Internal Decrease: The process of taking every other
stitch and placing it onto the next peg. When you are done every other peg
should have 2 stitches on it. EW all the pegs with stitches tossing both loops
over.
COF: Cast Off: The process of EW pegs 1 and 2, place loop 2
on peg 1, toss bottom loop over. Move loop 1 to peg 2 and EW pegs 2 and 3, move
loop 3 to peg 2, toss bottom loop over, move loop 2 to peg 3. Repeat till done.
Panels: 150 pegs: Flat:
EW CO 30 pegs
Row 1: P1 EW1
Row 2: EW1 P1
Row 3-15: Repeat rows 1 and 2
Row 16: CO 58
Row 17: EW88, CO58
Row 18-38(20rows): EW146
At this point Decrease by 1 on each end EW the row, then EW
a row, repeat this till down to 64 pegs. (Note: you are decreasing by 2 every
other row.)
ID64to32
place stitches on a stitch holder.
Repeat another panel like above.
Neck: 60 pegs: Circular:
Then place your stitches on the 60 peg 1/2" gauge loom,
2 stitches on each side will overlap each other. Make sure when placing the
stitches on the loom that the right side is facing you and the wrong side is
facing the inside of the loom. EW1 P1 for 50 rows, COF.
Sew up the front, back, and cuffs of the poncho.
You're Done!!!
Hi! Scarlett, thanks for this beautiful pattern, I began the poncho and with the video everything is going well for now! I have a small problem about the neck, I don't have the 60 pegs half gauge, I only have the 55pegs half gauge, is it possible for me to transfer on the 55pegs? thanks a lot for your help! and for sharing your talent with us! Sue
ReplyDeleteYou need to decrease down to 60 pegs then internal decrease on both halves, when you add the loops to the 55 peg loom you will over lap by 2 and 1 side will likely overlap by 3.
DeleteI am fairly new at this. I have a question about Row 3. Since Row 2 ended on peg 1 with a purl, do I start row 3 on peg 1 with another purl? How to I make that transition from Row 2 to Row 3? Thanks!!
ReplyDeleteYes you start with peg one. Wrap the peg in front and purl.
DeleteThanks!!
DeleteDo you have a pattern to make this Sweater Poncho on a Cindwood 3/8 small x-loom?
ReplyDeleteHello i have a 52 peg round loom but not the 60 peg, what should i Internal decrease to in order to make that amount of pegs to work i do believe it is a half inch guage as well, what size will the finished product fit as i am planning on making this for a friend who normally wears a 3x shirt i just want to make sure this will fit her comfortably
ReplyDelete